Return To Applications Page
    

 

ABOUT KMI

  PRODUCTS

  ELECTRO-HYDRAULIC ACTUATORS

    E-MAIL  

 

CONTACT KMI

 



A
P
P
L
I
C
A
T
I
O
N

RACK & PINION 1/4 TURN ACTUATOR
KMI Powered Rack & Pinion Actuator

 

 

KMI Actuators uses its patented technology to power a standard hydraulic rack and pinion actuator. The KMI hydraulic power cell is built onto the actuator and plumbed to the driving cylinders to provide a self contained unit, negating the need to bring in remote hydraulic power.

Adaptable to either a single or double rack actuator, the power cell will provide full functionality of a standard KMI linear actuator, including fail last, speed control and ramped reversibility.

The KMI power cell does not use solenoid directional valves to reverse direction, but the bi-directional and variable frequency capability of standard induction motors.

For quarter turn positioning, a rotary position monitor can be installed for modulating control or for open and close applications.

For more information please contact KMI.
  

 
 
 
 
 
 

Copyright 2008-2012  Koso M-Mac International, Inc., All rights reserved


Return To Applications Page

 

Return To Applications Page
    

 

ABOUT KMI

  PRODUCTS

  ELECTRO-HYDRAULIC ACTUATORS

    E-MAIL  

 

CONTACT KMI

 



A
P
P
L
I
C
A
T
I
O
N

RACK & PINION 1/4 TURN ACTUATOR
KMI Powered Rack & Pinion Actuator

 

 

If required, KMI can provide an on-board PID controller for 4-20mA control. This responds to a 4-20mA. It can also be used as a local switching device, (latching or momentary), or as a remote open-close switching device.

For more information please contact KMI.
  

 
 
 
 
 
 

Copyright 2008-2012  Koso M-Mac International, Inc., All rights reserved


Return To Applications Page